Luminous Solar hybrid PCU NXT 6 KW /96V
- Производитель: Luminous
- Модель: PCU NXT 6 KW /96V
- Наличие: Есть в наличии
- $1553.00 $1704.77
Luminous Solar Power conditioning Unit (PCU) is a powerful hybrid roof top solution for power generation from Sun energy. It has inbuilt MPPT Charge controller which converts maximum solar power into battery charging and running loads. It Comes with Mobile app, MCB Protection and complies IEC Standards, The Solar PCU charges the battery from grid and Solar panel both. If Sun energy is available then It charges the battery from solar Panel and if Solar is not available, then it charges the battery from Mains/Grid. It can charge the battery and supply solar power to connected load if solar generation is sufficient otherwise it gives first priority to solar battery charging and then supply additional power to connected loads.
Photovoltaic Input |
|
MPPT Voltage |
130V – 160V DC |
Maximum Input Current (A) |
46A |
Maximum PV power recommended (KW) |
6.6kW |
No. of Charge Controller |
1 |
MPPT Base Charge Controller |
|
Switching Element |
MOSFET/IGBT |
Type of Charger |
PWM with MPPT |
Grid Input |
|
Input Supply Phase |
1 Phase 2 Wire |
Nominal Voltage & Voltage Range |
230VAC (+15%, -20%) |
Battery |
|
Battery Voltage |
96V |
Battery recharge current setting range from Grid Side |
28A |
Battery recharge current setting range from Array Side |
56A |
Inverter |
|
Switching Element |
MOSFET/IGBT |
Control |
32 Bit DSP controlled* |
Nominal Output Voltage |
230V AC L-N |
Output Supply Phase |
1 Phase 2 Wire |
Output waveform |
Sine wave |
Nominal Frequency (Hz) |
50 Hz |
Power Factor (Within KVA/KW) |
0.6 lag to 1 (Within KVA and KW rating) |
Nominal Output Current (A) |
26A |
Voltage regulation |
+/-2% |
Voltage Stability in dynamic condition |
Complies with IEC/EN 62040-3, Class 1 |
Output voltage distortion with 100% linear load |
< 2% * |
Overload at nominal output voltage for 10 minutes |
125% |
Overload at nominal output voltage for 1 minute |
150% |
Inverter peak efficiency (Ref. STD IEC 61683) |
Up to 90% * |
Noise @ 1 meter (dBA +/-2dBA) |
<62dBA |
Protection degree with open doors |
IP20 |
Colour |
RAL 7016 Texture |
Dimension (WxDxH in cm) |
25x64x60 |
Cooling |
Forced Air |
Environment |
|
Location |
Indoor (Free from corrosive gases & conductive dust) |
Temperature Operating |
0-40 °C |
Max. Relative humidity @25°C (non-condensing) |
Up to 95% |
Max. Altitude above sea level without de-rating (m) |
1000 m (For higher altitude complies with IEC/EN 62040 - 3) |